Chrysler 2008 Aspen Owner'S Manual Download Page 242

Page: 242 / 479

Operating Instructions - Hands-Free Phone (If
Equipped)

Refer to “Hands-Free Communication (UConnect

)” in

Section 3.

Operating Instructions - Video Entertainment
System (VES™) (If Equipped)

Refer to separate “Video Entertainment System (VES™)
Guide.”

UNIVERSAL CONSUMER INTERFACE (UCI) — IF
EQUIPPED

NOTE:

This section is for sales code RES and REQ

radios only with UConnect

. For sales code REN touch

screen radio, refer to the separate User’s Manual.

This feature allows you to plug an iPod

mobile digital

device into the vehicle’s sound system through a connec-
tor (UCI connector) using an optional connection cable
(available through MOPAR

). See your authorized dealer

for details.

Using this feature,

•

the iPod

audio can be played on the vehicle’s sound

system, providing metadata (Track Title, Artist, Al-
bum, etc.) information display on radio.

•

the iPod

can be controlled using the radio buttons to

Play, Browse and List the iPod

contents.

•

the iPod

battery charges when plugged into the UCI

connector.

INSTRUMENT PANEL AND CONTROLS

241

Summary of Contents for 2008 Aspen
































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Aspen

Reviews:

Chrysler 2008 Aspen, Owner'S Manual, Page: 242 / 479

Search results

Summary of Contents for 2008 Aspen

Reviews: