1. Getting Started 2. Main Features
Kit Contents 1. Supports 2.5 inches & 3.5 inches SATA I/II HDD
●
Dual Bay Dock
2. Supports hardware duplication
●
Connection Cable 3. Output interface USB3.0 / eSATA (optional)
●
Power Adapter 4. Easy installation, plug & play and hot-swappable
●
Quick Installation Guide (QIG) 5. With LED indicator for working sta
Product Overview
1. OTB button 2. Disk 1 LED (Source Drive Bay)
3. Power indicator 4. Disk 2 LED (Target Drive Bay)
5. Hardware clone button 6. Disk eject buttons
7. eSATA port (optional) 8. USB3.0 port
9. Power socket 10. Power switch
3. Information before Using
The content of this installation information is the latest version relating to this device. If any relative content is changed,
it will be published on manufacturer
’
s website.
We strongly advise that you make a data backup before commencing the cloning process in case of a power failure during
the cloning process. The manufacturer can
’
t accept the responsibility for the loss of data or the misuse of the device.
Please also check the content of the package before commencing with the use of the device.
Minimum System Requirements
Intel Pentium II 350 MHz Compatible or Mac G3 Processor & greater
Microsoft Windows XP/Vista/7 compatible
USB-equipped system (Optional)
For USB3.0 speed, the system must come with USB3.0 specifications
4. Formatting Hard Drive
If you are using new/unformatted hard drives, you will need to first format and partition the drives before your operating
system will recognized them. Please refer to the documentation included with your hard drive and/or operating system
for more information about correctly formatting a hard drive.
5. Disk Dock Operation
The dual bay clone dock primarily functions as a 2-bay drive dock that allows you to easily connect up to 2 hard drives
to your computer through a single USB connection.
