07/2020
Corona II
– LED Line Scan Illumination
PMA_CHR_CD40069_R05_Manual_Corona-II_XLC4
11
3.5 Purpose / applications
◼
The Corona II and the controller XLC4 are designed for installation in machines and
systems which are used for commercial and industrial applications.
◼
The owner of the machine or system in which the Corona II and the controller XLC4 are
installed is responsible for compliance with relevant safety regulations, standards and
directives. Commissioning of the Corona II and the controller XLC4 is not permitted until it
has been verified that the machine or system in which the Corona II and the controller
XLC4 are installed complies with the safety regulations and standards of the country in
which the Corona II and the controller XLC4 are run.
◼
The owner of the machine or system in which the Corona II and the controller XLC4 are
installed must verify the suitability of the Corona II and the XLC4 controller for its intended
use.
◼
The safety regulations of the country in which the device is used must be complied with.
◼
The Corona II and the controller XLC4 may only be connected or used as described in
this manual.
◼
The Corona II and the controller XLC4 must be set up and installed in compliance with
the instructions contained in this manual.