chromasens allPIXA, Manual, Page: 142 / 199

CD40047_R04_allPIXA_User-Manual.docx 142
Figure 38: Sample of raw and theoretical video and dark reference values
Current white reference values
Name
Name Current white reference levels Read-only
Function
Video value measured by the camera inside the white control mark, mean value
over the defined area and the number of ROI defined for averaging
Channels Red, Green, Blue; Odd; Even Front; Rear
Unit
Integer
Linear
Dependency
None
Notes

Refers to the white control mark.

10-bit video value during output range of the image at the CameraLink port is
usually in the 8-bit range
Camera: Value:
Lower limit All 0
Upper limit
All 1023
This parameter refers to the video values labeled with (2) in the diagram of section 4.10 .
Enable continuous white control
Name
Name
Enable continuous white control
Function Enables the closed loop control for white balancing
Channels all
Unit
Bool
Dependency
None
Notes
Camera: Value: Function:
Lower limit all 0 Off
Upper limit
all 1 On