chromasens allPIXA SWIR CD40199, Manual

Page: 32 / 49

PMA_CHR_CD40199_R01_allPIXA_SWIR_GigE_User_Manual.docx 32
6 Working with GCT
6.1 Discovering and connecting the camera in GCT
The camera can be configured with any GenICam compliant software. We recommend using
the Chromasens Software GCT (GenICam Control Tool) Version 2 or higher, which is optimized
for the use with Chromasens cameras.
GCT is available for download free of charge in the Chromasens Download Center
https://chromasens.de/downloads .
For information about installing and using GCT, refer to the GCT manual.
If the camera cannot be detected by GCT or if the camera shows up but cannot be opened, it
may be necessary to adjust the configuration of the network adapter of your computer or the
network settings of the camera.
For details on the factory settings of the camera, see section 2.7.
To use DHCP or LLA autoconfiguration, Persistent IP must be disabled in the camera settings
as shown in the screenshot below as Persistent IP has higher priority than DHCP or LLA .
For more details on network settings camera discovery please refer to the GCT manual.
6.2 Updating the firmware
If a new firmware package is available, it can be downloaded from the Chromasens website as
.bin file. For more information about updating the firmware, refer to the GCT manual.