chromasens allPIXA pro, Manual

Page: 198 / 227

Chromasens CD40127_R02 allPIXA_pro_User Manual.docx 198
9.11.5 Information insertion mode
Name
Name Information insertion mode
Function
Enables the function for displaying additional information in the image and
selects the tap in which the information isdisplayed.
Channels All
Unit
Byte
Dependency
None
Notes
Camera Function
All First pixels
All Last pixels
All First and last pixels
9.11.6 Insert mode
Name
Name
Insert mode
Function
Permits to display different camera data in the image (for example image
counter or line counter)
Channels All
Unit
Byte
Dependency
None
Notes
The parameter inside the camera is measured in bytes. In CST the single
bits can be specified by the check boxes.
Camera Function
All First line info block
All Test ramp last line
All Check sum last line
All Info block in each line
All Activate pixel 9-16
All Gray value sum <-> Contrast value sum
Single information is displayed in the image as shown below:

„FirstLine_InfoBlock“:
Image-related information is shown in the first 22 pixels of the first image line.
The image functionality is required.

„EachLine_InfoBlock“:
Line-related information is shown in the first 10 or 17 pixels of each line, depending on the
selections for
Insert Mode .

Last line information:
There are two options for the last image line:
o
A test ramp is inserted into the last line. Image functionality is required.
It starts with 128 from outside, increments with 1 and overruns with 255.
o
The check sum for the image data is inserted into the last transmitted pixels of each
tap. In the resulting image they are located centrically on both sides of the tap border.
Image functionality is required.