Chromasens CD40127_R02 allPIXA_pro_User Manual.docx
194
9.11 Output format
9.11.1 Video output mode
Name
Name
Video output mode
Function
Sets the output on the Camera Link port to different modes, for example
RGB as standard or to gray-level output.
Channels
All
Unit
Integer
Dependency
Notes
If
Color image
is selected, 6 different output formats are available at
Type of
CameraLink interface
, ranging from
Base
up to
Full80_10Tx8Bit 1X Raw
.
For mono images, only
Base
mode is available, for
Mono image (8 Bit on
CL-port 1)
in addition
Base 3T8bit 1X3 Raw
.
For the gray-image calculation, the values of
Color weights
are used.
Camera:
Value:
Function:
Lower limit
All
0
Color image (3*8 Bit parallel)
All
1
Mono image (8 Bit on CL-port 1)
All
2
Mono image (10 Bit on CL-port 1)
Upper limit
All
3
Mono image (12 Bit on CL-Port 1)
OEM versions
Special modes are available
9.11.2 Color weights
Name
Name
Color weights
Function
Calculates the mono-value for the pixel using data from RGB, weighted with
this factor.
Channels
Red; Green; Blue
Unit
Float
Step:
0,01
Linear
Dependency
Only active if output mode on Camera Link is set to
Mono mode
.
Notes
The sum of these 3 parameters should be
1.0
. A higher sum causes a
“brighter” image, and a lower sum causes a “darker” image. Standard values
by NTSC and the default values in the camera are the following:
Red:
0.299
Green:
0.587
Blue:
0.114
Camera:
Value CST:
Lower limit
All
0
Upper limit
All
1
