2 Technical data
10 / 99
CD40131 Version 1
3DPIXA
2
Technical data
2.1
Intended use
The 3DPIXA is a stereo camera using line scan technology. It provides stereo images as a
basis for the calculation of the 3D height data by one or multiple GPUs.
The 3DPIXA is designed for installation in machines and systems which are used for
commercial and industrial applications, such as:
Fast inline height measurement
Completeness check in 2D and 3D
Verification of 2D and 3D dimensions
Identifying micron defects
Combined 3D and 2D color inspection
3D web inspection
When using the 3DPIXA the following aspects must be recognized:
The owner of the machine or system in which the 3DPIXA is installed is responsible for
compliance with relevant safety regulations, standards and directives. Commissioning of
the 3DPIXA is not permitted until it has been verified that the machine or system in which
the 3DPIXA is installed complies with the safety regulations and standards of the country
in which the 3DPIXA is run.
The owner of the machine or system in which the 3DPIXA is installed must verify the
suitability of the 3DPIXA for its intended use.
The safety regulations of the country in which the device is used must be complied with.
The 3DPIXA may only be connected or used as described in this manual.
The 3DPIXA must be set up and installed in compliance with the instructions contained in
this manual.
2.2
Definition of the camera identification
The article code of the 3DPIXA contains information on the camera model and is structured
into 4 parts. Each part contains different information:
Fig. 1:
Structure of the article code
1
Type of electronics:
–
470
: allPIXA (classic)
–
520
: allPIXA pro
2
3DPIXA type
–
CXX
: Compact
–
DXX
: Dual
–
EXX
: OEM
3
Resolution in
µm
4
Field of view in
mm
