manualshive.com logo in svg

Chromalox IntelliTRACE, Installation & Operation Manual, Page: 23 / 28

Share
Download
Chromalox IntelliTRACE Installation & Operation Manual Download Page 23

23

Figure 17

Display

•  Right Panel Visible – Determine if you wish to have the Panel List displayed at all times. 

Reporting

•  Send Report: Choose whether or not reports are to be sent 
•  Send Report to: An event log report may be sent to an email address
•  Send Report Every: (Report Frequency) – How often shall the event log report be sent?

Alarm Behavior

•  Use audible sound when alarm occurs – When engaged, an audible beep will occur at the intelliTRACE 

Supervisory Controller.  

•  Send email when alarm occurs – when selected, an email will be sent to the provided address when an 

alarm event occurs. 

•  Select which types of alarms should be sent – Choose which alarms types are valid for an email alert message. 

Security

•  Revise all four levels of password security

Panel (System) Connection

•  Connect to all systems on startup – Automate communication connection to all systems during startup.

Summary of Contents for IntelliTRACE





























Reviews:

No comments