16
4. Use the DOWN or UP keys to highlight
IP AD-
DRESS, then press ENTER key to edit the IP Ad-
dress:
a. The
IP ADDRESS is composed of four fields,
each with a value range from 0 to 255.
b. Use the UP and DOWN keys to adjust a field val-
ue.
c. Use the RESET key to toggle between any of the
four fields being edited.
d. To complete and establish a new IP Address,
press the ENTER key to return to the COMMS
MENU.
As previously mentioned, the factory default of the ITC
is to have the IP Address assigned automatically by the
host DHCP Server. However, if the IP Address was ob-
tained manually and now the desire is to have it estab-
lished automatically from a DHCP server, the following
steps must be taken:
1. Navigate to
DHCP within the COMMS menu, and
then press ENTER.
2. Use the DOWN or UP keys to toggle the selection
between
USE and DO NOT USE. Make sure that
USE is displayed and then press ENTER to confirm
selection.
NOTE: After pressing ENTER, power to the
controller must be cycled for the change in the
DHCP setting to take effect.
Automatically Assign IP Address