10
The Keypad
There are five capacitive touch keys or buttons on the
front panel. The keypad allows the user to select or
change parameters & settings, clear alarms and navigate
throughout the ITC programming areas. See Figure 3
shown below:
MODE
UP
DOWN
ENTER
RESET
Figure 3
The function of each key is as follows:
KEY
FUNCTION
MODE
Allows the user to Navigate between
Menus & Main Window
UP
1. Within a Menu, Scroll UP to next Pa-
rameter or Setting within that Menu
2. When viewing an adjustable parameter
or setting, increments that parameter
UP to the next available value. For a
quick scroll, push and hold the key.
DOWN
1. Within a Menu, Scroll DOWN to next
Parameter or Setting within that Menu
2. When viewing an adjustable parameter
or setting, increments that parameter
DOWN to the next available value. For a
quick scroll, push and hold the key.
ENTER
1. To accept a parameter or setting that
has been entered or changed.
2. Press to accept the change when view-
ing an adjustable parameter or setting.
3. When in LOGIN Screen, press to ad-
vance to next security digit.
RESET Resets or clears all alarms
Programming the ITC
The ITC is pre-programmed with default parameters and
settings that allow it to function “right out of the box”.
To change any of the parameters or settings on the ITC,
you must access the appropriate menu(s): Temperature
Menu, Current Menu, Control Menu, Comms (commu-
nications) Menu or System Menu.
To access any of these menus, press the
button on the keypad. You will be presented with the
Login screen:
Press
MODE
UP
DOWN
ENTER
RESET
to advance to the next digit.