45
Modbus Wiring Connection for ITASC1D2 & ITLSC1D2
Control Panels
Modbus TCP
1. Connect Ethernet cable to the back of the HMI display
2. Press “Comm Settings” button on the System page
3. Go to Offline mode and touch [Main Unit] on the item changeover switch.
4. From the [Main Unit Settings] screen, touch [Ethernet Local Settings].
5. The [Ethernet Local Settings] screen opens. Touch the IP address input field to display the numeric touch keys
and then enter an IP address. (For example, 192.168.0.1)
Note: For details about the IP address setting, ask your network administrator.
6. Using the same steps, specify the [Subnet Mask], [Port], and [Gateway].
7. [Exit] saves the changes and restarts the display unit.
Summary of Contents for IntelliTrace ITAS
Page 4: ......