23
Active Alarms
Alarms within any 6-circuit or 2-circuit grouping are in-
dicted by RED squares in the left and right panels on
any screen. If the square is GREEN, then no faults exist
within that 6-circuit grouping. Once a fault is realized
within any 6-circuit grouping, one may view the indi-
vidual alarm circuit or circuits in two different ways:
1. When in the Main Display screen, one may navigate
to the desired 6-circuit grouping via the Navigation
buttons found in the upper right hand or upper left
hand corner. Alarm conditions are illustrated within
each circuit window. Up to three alarm conditions
can be illustrated for any single circuit on the Main
Menu screen.
2. One may view the status of all fault conditions by se-
lecting the ACTIVE ALARMS MENU button located
at the bottom of the main display screen. To navigate
to the desired 6-circuit grouping, one must press the
Circuit Navigation but-tons found in the upper right
or left corner of any screen. See Figure 13.
Clearing Alarms
Except for a Communications Alarm and a Latched
GFEP Alarm, all other alarms are cleared once the ac-
ceptable parameters are achieved.
Figure 13
Summary of Contents for IntelliTrace ITAS
Page 4: ......