19
System Properties
Several informative items and general settings are
available within the System Menu.
The System tab is only available to the two highest
owner security levels: Manager and Engineer.
The Autocycle function is reviewed in the Autocycle
Feature section.
Here, one can enter/revise the Facility Name, Date,
Time, Temperature Units, Auto Cycle Interval and Se-
curity Codes. The Manager has access to all security
codes while the Engineer has access to only the Engi-
neering Security Code. See Figure 9.
The Security Passwords and the respective rights for
each security level are reviewed in the
Security Level
and Password Screen Section.
Figure 9
System Page Definitions
Facility – name of the facility
Units – degree Celsius or Fahrenheit
Autocycle – Autocycle feature. Value of 0 disables it
Number of circuits – number of SSR circuits (not
boards) installed in the panel
Number of RTD boards – Number of RTD boards in-
stalled in the panel
Modbus – Modbus feature can be disabled or enabled
to speed up processing and screen update current se-
curity level password
Comm Settings – used to select correct Modbus com-
munication parameters (baud rate, parity, stop bits, etc)
IP Address – present IP address of the HMI screen. IP
address can be changed by pushing Comm Settings
button.
Log In – used to change current security level
Log Off – used to log off from the system
Change Password – used to change current security
level password
Summary of Contents for IntelliTrace ITAS
Page 4: ......