60
CFW Connection Example for Independent Loads in Open Delta, 3-Phase Line without Neutral
CFW 3-Phase wiring for 3 Independent Single-Phase Loads
It is possible to connect two single-phase loads also to different line voltages, between line to line or line to neutral.
It is possible to manage different power values for each one of the two loads.
Dip 1
Dip 2
Dip 3
Dip 4
Dip 5
OFF
OFF
OFF
OFF
OFF
V
line voltage
P
power of each single-phase load
Id
load current if resistive load cos
φ
=1
FIRING MODE
ZC, BF, HSC, PA
HB DIAGNOSTIC
AVAILABLE
Partial and total load failure pof each single leg
Fast Fuse
Needed only for controller with option Fuse = 0
GG Fast Fuse
See Fuse section
(*)IMPORTANT:
Take care
to connect
terminals 1/L1
and 3/L1 to the
same phase
(**)Only required
with Vload
measurement
input option.
Dip 1
Dip 2
Dip 3
Dip 4
Dip 5
OFF
ON
OFF
OFF
OFF
V
line voltage
P
power of each single-phase load
Id
load current if resistive load cos
φ
=1
FIRING MODE
ZC, BF, HSC, PA
HB DIAGNOSTIC
AVAILABLE
Partial and total load failure pof each single leg
Fast Fuse
Needed only for controller with option Fuse = 0
GG Fast Fuse
See Fuse section
(*)IMPORTANT:
Take care
to connect
terminals 1/L1
and 3/L1 to the
same phase
(**)Only required
with Vload
measurement
input option.
Summary of Contents for CFW
Page 2: ...ii...