Christie VeinViewer Flex, User Manual, Page: 61 / 76

CHAPTER ELEVEN: TECHNICAL SPECIFICATIONS 55
VEINVIEWER FLEX USER GUIDE
020-300020-03 Rev. 1 (03-2013)
CHAPTER ELEVEN: TECHNICAL SPECIFICATIONS
VEINVIEWER FLEX TECHNICAL SPECIFICATIONS
Model Number 134-002102-xx
Version, Model Name Version 3.0, Model Flex
Weight 1.6 lbs (0.7 kg)
S-Mount C-Clamp 0.5 in. (13 mm) to 2.5 in. (64 mm)
S-Mount Super Clamp Max 1.3 in. (32 mm) flat surface; 0.5 in. (13 mm) to
2.1 in. (53 mm) round surface
S-Mount Maximum
Extension Vertical: 19.6 in. (49.8 cm)
Horizontal: 25.6 in. (65 cm)
Power Supply Class II, AC Power Adapter
Input: 100-240VAC, 0.6A, 50/60Hz
Battery Charger Input: 9 -12VDC, 2A
Battery 2 cell Lithium Ion Rechargeable Battery
- Each battery stores <100Wh of energy
Battery IR Wavelength,
peak Approximately 850 nm
Visible Wavelength,
peak Approximately 530 nm
Ratings 9V DC, 1.1A Maximum
Duty Cycle Continuous
Operating Temperature +60°F to +95°F (+16°C to +35°C)
Storage Temperature -10°F to +140°F (-23°C to +60°C)
Storage Humidity 0% to 90% non-condensing
Atmospheric Pressure
(storage and operating) 700 hPa – 1,060 hPa
Operating Humidity 10% to 90% non-condensing
Support Christie Technical Support
Safety VeinViewer Flex has been tested and complies with
General Requirements for Safety per IEC 60601-1.
Emission VeinViewer Flex has been tested to and complies
with IEC60601-1-2 standard for Electromagnetic
Compatibility (EMC) and for radiated and
conducted emissions.
EMC Classified B
Regulatory Classified FDA Class 1 Exempt
Applied Parts No applied parts – any contact with the equipment
is incidental.