Christie VeinViewer Flex, User Manual, Page: 33 / 76

CHAPTER FIVE: START-UP PROCEDURE 27
VEINVIEWER FLEX USER GUIDE
020-300020-03 Rev. 1 (03-2013)
CHAPTER FIVE: START-UP PROCEDURE
POWERING VEINVIEWER FLEX
VeinViewer Flex may be operated by AC Power Adapter or Battery power.
WARNING: VeinViewer Flex is shipped with a detachable AC
Power Adapter rated specifically for VeinViewer Flex.
VeinViewer Flex is compliant with IEC 60601-1 National
differences for: Austria, Australia, Belgium, Brazil, Canada,
Switzerland, Czech Republic, Germany, Denmark, Finland,
France, United Kingdom, Greece, Hungary, Ireland, Israel,
India, Italy, Japan, Kenya, Korea, Netherlands, Norway, Poland,
Portugal, Serbia, Russian Federation, Sweden, Slovakia,
Slovenia, Turkey, Ukraine, United States.
Before you connect VeinViewer Flex to a power source, ensure
that the voltage rating of the Power Supply matches that of
the available power source.
The AC Power Adapter acts as the MAINS disconnect.
Inspect the AC Power Adapter on a regular basis to avoid the
risk of electrical shock and/or fire hazard. If the Power Cord
and plug are or appear damaged DO NOT use VeinViewer Flex
and immediately contact the Christie Technical Support
department for further instruction.
The AC Power Adapter is equipped with interchangeable input connectors. To
change the input connector slide the desired connector (prongs up) onto the
adapter in direction shown.
CAUTION: Ensure the input connector is properly engaged to the
AC Power Adapter. An Audible snap will be heard; failure to do
so could affect the safety and effectiveness of VeinViewer Flex.
UK EU China North America Australia