manualshive.com logo in svg

Christie TruLife+ Griffyn 4K32-RGB, Installation And Setup Manual

Share
Download
Christie TruLife+ Griffyn 4K32-RGB Installation And Setup Manual Download Page 60

Format

Cables

Hres

Vres

Frame Rate
(Hz)

Sampling

Bit-Depth

1920x1200

1

1920

1200

60

RGB

8bpc

One-port 3D

The following one-port 3D HDMI 2.0 image formats are supported by the SDVoE input.

Format

Cables Hres Vres Frame Rate

(Hz)

Sampling

Bit-Depth Notes

3D 1280x720

1

1280

720

50, 60

Y'C'bC'r/RGB/
4:4:4 Y'C'bC'r/
4:2:2

8/10/12bpc Frame-packing/

top-and-bottom

1920x1080

1

1920

1080

24, 25,
30 ,50, 60

Y'C'bC'r/RGB/
4:4:4 Y'C'bC'r/
4:2:2

8/10/12bpc Frame-packing

Connecting to a computer with USB

The two USB ports can be used for upgrades, backups, restores, profile management, and interrogator

retrieval.

•

USB-C 3.0 Interface—USB-C Connector with locking mechanism supporting USB 3.0 protocol
(5 Gb/s), power over USB (2 A @ 5 VDC), and DP 1.2 Alt mode for video output.
This port can be used as a high speed data interface.

•

USB Type A 3.0 Interface—USB Type A connector with locking mechanism supporting USB 3.0
protocol (5 Gb/s) and power over USB (2 A @ 5 VDC). Intended for data ingest using USB
flash drives for the purposes of upgrading, profile management, and interrogator retrieval.
This port can be connected to a Christie-recommended WiFi USB device to provide wireless
Ethernet control.

For information on performing upgrades, backups, restores, profile management, and interrogator
retrieval, refer to the Christie User Guide (P/N: 020-103315-XX).

Connecting to a computer or server with
10/100/1000 base-T Ethernet

Communicate with a remote computer, server, or an existing network using a RJ-45 cable.
The port located on the Video Input panel uses Christie-proprietary protocol or Art-Net control protocol
and is intended for Christie accessories or automation controllers only.

1. Use an RJ-45 cable to connect the Ethernet hub or switch to the Ethernet port, located on the

projector Video Input panel.

Connecting devices and establishing communication

Griffyn 4K32-RGB Installation and Setup Guide

60

020-103314-05 Rev. 1 (04-2021)

Copyright 

©

 2021 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for TruLife+ Griffyn 4K32-RGB














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands