Terra Manager
Terra User Manual
80
020-102838-10 Rev. 1 (05-2020)
Copyright
©
2020 Christie Digital Systems USA Inc. All rights reserved.
Set Date and Time
Using the Time Zone and Date and Time settings, set the date and time and the clock type (12-hour
or 24-hour).
Restart the Controller
The Restart option should be used to restart (power off and then power on) the Controller.
The restart process initiates a restart of the controller. Make sure all changes are
saved.
Verify all users are logged off before starting the restart process.
Do not perform a firmware update when a restart process is in progress.
To restart the Controller:
1.
Navigate to the Global page.
2.
Click
Restart
.
3.
Respond
Yes
to the confirmation dialog to proceed.
Shut Down the Controller
The Shut Down option should be used to power off the Controller.
The shutdown process initiates a power off of the controller. Make sure all changes
are saved.
Verify all users are logged off before starting the shutdown process.
Do not perform a firmware update when a shutdown process is in progress.
To shut down (power off) the controller:
1.
Navigate to the Global page.
2.
Click
Shut Down
.
3.
Respond
Yes
to the confirmation dialog to proceed.
Backup the System
The Backup Configuration option creates a .TBF file that backups the configuration for Transmitters,
Receivers, Display Arrays, layouts, users, and Terra Manager global settings on the controller.
Best practice is to create backups regularly. If your configuration is changing often,
increase the frequency of your backups to ensure the most recent data is backed
up.
How to Backup the System
To create a backup of your system:
