Network guide
Secure Series II LCD Panels User Guide
50
020-001779-01 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
1.
Go to Local Network Setting
–
Internet protocol version 4(TCP/IPv4).
2.
If DHCP disable on the on-screen display, From the General tab set the following:
•
IP address: 192.168.10.50
The IP address must be a different address than the display.
•
Subnet Mask: 255.255.255.0
1.
If DHCP is enabled, select
Obtain an IP address automatically.
2.
Select OK
.
The ping test checks the Ethernet connection.
1.
Press W R.
2.
Type
cmd
.
3.
Click OK
4.
Type
ping -t 192.168.10.10
.
Replace the IP address with the address of display panel.
A response similar to below indicates success:
A response similar to below indicates a failure
To connect to the built-in web server open a web browser (for example, Internet Explorer or Chrome) and
follow the instructions below.
1.
In a web browser, go to the address of the display panel.
The web page provide all the menu controls on the on-screen display.
