Secure Series II LCD Panels User Guide
22
020-001779-01 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Installation of the display must be performed by a qualified installation specialist.
The appearance of actual components may differ from the image shown. To install batteries in the remote
control:
1.
Press the tab on the battery case and open it.
2.
Insert the battery (1.5V AAA) into the battery case.
3.
Insert the battery case until clack sounds.
•
Make sure the battery polarities are correct when installing the batteries.
•
If you not using the remote control for a long time, remove the batteries to avoid damage from
battery leakage.
•
Do not expose batteries to excessive heat such as sunshine, fire, or so on.
•
Make sure nothing obstructs the infrared beam between the remote control and the IR receiver on the
display.
•
If the effective range of the remote control decreases, or it stops working, replace the batteries with
new ones.
•
The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or
fluorescent lighting.
