Christie RS232, Technical Reference, Page: 6 / 25

Christie MicroTiles Serial Commands Technical Reference 6
020-101547-01 Rev. 1 (03-2015)
Serial Commands
AAC–Automatic Array Configuration
Automatically detects changes in the array’s setup and configures the array. For example, addition
or deletion of tiles, moving of tiles, changing of subarrays, changing of manually mapped tiles.
Commands
AGN–Alignment
Sets the image alignment of the MicroTiles.
Commands
i
• The commands and parameters are case sensitive. Use capital letters for the commands.
• Send a carriage return “/r” or new line “/n” at the end of your output, this will start the processing
of command.
• Before executing a command that applies to selected tiles or ECUs, you must execute the SEL
command to identify the tiles or ECUs. See SEL–Select on page 21.
Command Description Values
AAC? Returns the automatic array
reconfiguration mode. -
AAC <0|1> Sets the automatic array reconfiguration
mode. 0 = Off
1 = On
Command Description
AGN? Retrieves the image alignment adjustment of the selected
MicroTiles.