manualshive.com logo in svg

Christie RS232, Technical Reference, Page: 23 / 25

Share
Download
Christie RS232 Technical Reference Download Page 23

   Serial Commands

Christie MicroTiles Serial Commands Technical Reference

23

020-101547-01 Rev. 1 (03-2015)

Examples

UCR–Uniformity Correction

Turns the uniformity correction on and off.

Commands

Examples

VDM–Video Mode

Sets the video mode.

Get the local time.

(TMD+TIME?)

The following results are displayed:

Index  IP              Serial       Time

@m 0   192.168.228.45  0x0024e999   17:50:45

Get the local time.

(TMD+TIME?)

Set the time to 3pm.

(TMD+TIM “15:00:00”)

(65535 00000 FYI0916 “Setting Time to 15:00:00”)

Get the date to January 17th, 2015

(TMD+DATE “2015/01/17”)

(65535 00000 FYI--916 “Setting Date to 2015/01/17”)

Command

Description

Values

UCR?

Returns the uniformity correction settings for the display.

-

UCR <0 | 1>

Changes the uniformity correction settings for the display.

0 = Off
1 = On

Get the uniformity correction.

(UCR?)

The following results are displayed:

Index  Serial      Uniformity Correction

0      0x0023ecf8  1

Summary of Contents for RS232


























Reviews:

No comments