Serial Command Reference
Mirage WQ-L User Manual
92
020-101372-01 Rev. 1 (04-2014)
Projector Color Adjustment (PCA)
PJH
CONTROL GROUP:
Unsaved
SUBCLASS:
Power Down
ACCESS LEVEL:
Operator
Description
Allows ArrayLOC projector-specific color adjustments ("tweaks") to be set. Subcodes ROxR - BOxW have a small
'x' listed. The small 'x' represents the color table being edited.
Different color tables, denoted by 'x' - replace 'x' with the following:
S = SD table (Read Only)
H = HD table (Read Only)
M = Max drives (Read Only)
E = Rec 709/EBU (Read Only)
F = Factory drives (Read Only)
1 = user table 1
2 = user table 2
3 = user table 3
4 = user table 4
C = current user table
Subcode
ROxR
Description of Use
Adjusts the red part of red. Range 1 - 2000. Expressed with
one decimal point (Range is 0.1 - 200.0).
GOxR
Adjusts the green part of red. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
BOxR
Adjusts the blue part of red. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
ROxG
Adjusts the red part of green. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
GOxG
Adjusts the green part of green. Range 1 - 2000. Expressed
with one decimal point (Range is 0.1 - 200.0).
BOxG
Adjusts the blue part of green. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
ROxB
Adjusts the red part of blue. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
GOxB
Adjusts the green part of blue. Range -1000 - 1000. Expressed
with one decimal point (Range is -100.0 - 100.0).
BOxB
Adjusts the blue part of blue. Range 1 - 2000. Expressed with
one decimal point (Range is 0.1 - 200.0).
ROxW
Adjusts the red part of white. Range 1 - 2000. Expressed with
one decimal (Range is 0.1 - 200.0).
GOxW
Adjusts the green part of white. Range 1 - 2000. Expressed
with one decimal (Range is 0.1 - 200.0).
BOxW
Adjusts the blue part of white. Range 1 - 2000. Expressed with
one decimal (Range is 0.1 - 200.0).
CLRA Clear
the
current adjustments.
RSTL
Reset the current adjustment to factory defaults.
RSTA
Reset all adjustments to factory defaults.
SAVE
Saves current set of adjustments as factory defaults.
WBAJ
White Brightness Adjustment
COPY
Copy data setting from a referenced table to the selected one.
