Serial Command Reference
Mirage WQ-L User Manual
83
020-101372-01 Rev. 1 (04-2014)
Serial Flow Control (FLW)
Frame Delay (FRD)
FLW
CONTROL GROUP:
Preference
SUBCLASS:
Power Down
ACCESS LEVEL:
Advanced
Description
Set the flow control for a serial communications port.
Subcode
PRTA
Description of Use
Set the mode on port A (RS232 IN)
.
PRTB
Set the mode on port B (RS232 OUT)
.
PRTC
Set the mode on port C (RS422)
.
Examples:
(FLW+PRTA 0) Set no flow control on port A.
(FLW+PRTA 1) Set flow control on port A to software.
(FLW+PRTA?) Get flow control (FLW+PRTA!001 "Software")
FRD
CONTROL GROUP:
Preference
SUBCLASS:
Power Up
ACCESS LEVEL:
Operator
Description
Delays the output signal timing relative to the Input signal timing by a fraction of a frame, and up to one frame.
The value used is a 1/1000th of a frame. For example, 1000 equals one frame.
See
Frame Lock Enable (FLE) on page 82
.
Subcode
STAT?
Description of Use
Retrieve the actual minimum frame delay.
Examples:
(FRD 500) Delay 0.5 frames.
(FRD+STAT?) Retrieve actual minimum frame delay.