Christie Mirage WQ-L, User Manual

Page: 40 / 116

Operation
Mirage WQ-L User Manual 40
020-101372-01 Rev. 1 (04-2014)
Shutter
The Shutter button powers the LEDS On and
Off to simulate shutter operation. Press and
hold the Shutter button to move between
simulated shutter states in the following
order: Open–Closed–Open. Or, press and
release the Shutter button followed
immediately by the up arrow (closed) or
down arrow (open) to guarantee the correct
state. The shutter is open upon power-up.
Close the shutter to block the displayed
image while maintaining access to projector
functions. Opening the shutter restores the
image. The LED status display on the
projector displays
SH
when the shutter is in
black mode.
Input
Press Input to select the main input. Press
the button again to select the secondary
input. See
Select Inputs on page 41.
Input Slots
Press Slot 1 to assign Input 1 to the Main
Input or press Slot 2 to assign Input 2 to the
Main Input. Press Slot 3 to display
interleaved video (120 Hz). Press Slot 4 to
display InfraScene.
Swap
Press Swap to quickly switch the inputs between the main and secondary. See Select Inputs on
page 41.
Test
Steps forward through all internal test patterns. After stepping past the last test pattern, the menu
returns to the current input. Press Test and then cycle through the test patterns by pressing the
left / right arrow keys. Press Exit to return to the current input.
Proj
Press Proj to display the current IP and projector number on screen.
Enter
Press Enter to select a highlighted item, to toggle a check box, or to accept a parameter
adjustment and return to the previous menu or image.
Pow er A uto
Test Shutter
Input Slots
Slot 1
Slot 3
Slot 2
Slot 4
PIP Sw ap
M enu
C hannel
G am m a
1 3
2
4 6
5
7 9
8
0
H elp Func
B right
C ontrast
Exit
Proj
Lens H
Lens V
Zoom
Focus
Laser
?
Input O SD
10+
Power
Input Slots
Test
Display a test pattern.
Laser Pointer
Activated when the
Laser button is pressed.
Shutter
Powers LEDs On and Off to
simulate shutter operation.
Proj
Select a projector in
multi-projector installations.
Input
Swap
Select an active
or inactive input.
Swap inputs.
Switch the active
input source.
Laser
Activate laser pointer.