Web UI Overview
Mirage WQ-L User Manual
36
020-101372-01 Rev. 1 (04-2014)
5. Click Upload.
Create a Backup File
1. From the Backup drop-down list, select from the following file types: All, Preferences,
Configuration, Users, or Real Time Events.
2. To initiate the download, click Backup. Once finished, a File Download window appears.
3. Click Save.
4. Locate and select a folder where you wish to save the file.
5. Click Save.
Restore a File
1. Select a file type (All, Preferences, Configuration, Users or Real Time Events) from the
Restore drop-down list.
2. To locate and select the file to restore, click Choose File.
3. Click Restore. Once finished, a confirmation message appears.
Perform Diagnostic Test
1. To initiate the diagnostic test and download the diagnostic test results to your computer, click
Interrogate. Once the download is complete, a File Download window appears.
2. To save the diagnostic test results file click Save.
Admin Tab—Users
Under the Admin tab, select the Users tab at the bottom of the window to add to, and delete users
from accessing the projector, and change passwords. Creating user accounts does not allow you to
assign specific privileges.
Advanced Tab—Real Time Events (RTE)
The RTE tab is where you can manage real-time events (i.e. add, delete, edit, copy and setup the
GPIO).
i
Do not select All unless transferring all files from one projector to another or cloning.
i
Once the Interrogate function begins, you must allow it to run until completion.
i
If capitalization is used for the username or password, it will automatically convert it to
lower case. Usernames can be a minimum of four and a maximum of 32 characters.
Passwords can be a minimum of four and a maximum of 128 characters.
