•
Improved lens mount with bayonet style insertion
•
Single phase 200-240 V
•
Side access to optical adjustments
•
4K resolution for flexibility and future proofing
•
Omnidirectional operation
•
TruLife electronics
•
LCD display to provide information at-a-glance
How the projector works
The Mirage 304K accepts a variety of input signals for projection on front or rear projection screens,
typical in commercial or other large screen applications.
High-brightness light is generated by mercury vapor lamps, then modulated by three Digital
Micromirror Device (DMD) panels responding to incoming data streams of digitized red, green and blue
color information. As these digital streams flow from the source, light from the responding on pixels of
each panel is reflected, converged and then projected to the screen through one or more projection
lenses, where all pixel reflections are superimposed in sharp full-color images.
List of components
Verify all components were received with the projector.
•
Power cord for full brightness, six lamp operation
•
Power cord for limited power, single lamp operation
•
IR remote keypad
Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
Digital Systems USA Inc. website. Read all instructions before using or servicing this product.
Mirage 304K
1. Access the documentation from the Christie website:
•
Go to http://bit.ly/2Fx47O4 or
https://www.christiedigital.com/en-us/business/products/projectors/3-chip-dlp/3d-
projectors
•
Scan the QR code using a QR code reader app on a smartphone or tablet.
Introduction
Mirage 304K (Bm.1) Installation and Setup Guide
13
020-102013-12 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for Mirage 304K
Page 1: ...Installation and Setup Guide 020 102013 12 Mirage 304K Bm 1...
Page 68: ......
