•
OSD (All Tiles)—Displays a 800 x 600 image, scaled to approximately 720 x 540, which
is the viewable area of the screen.
•
OSD (Unscaled with Overscan) (All Tiles)—Displays test patterns in overscan
resolution (800 x 600).
The display mode is applied as soon as it is selected from the menu.
3. Click Apply.
Powering all tiles on or off through the WebUI
Selecting Power ON Canvas and Power OFF Canvas affects the entire array, regardless of how many
tiles have been selected through the WebUI.
•
To turn on all tiles in the array, select Configuration > Power > Power On Canvas.
To turn off all tiles in the array, select Configuration > Power > Power Off Canvas.
Wait approximately ten seconds between powering the canvas off and on.
Saving tile and ECU settings
To move the tile and ECU settings to additional devices, save the settings to an external location.
1. Select Configuration > Save & Restore > Save & Restore Settings.
2. To download and save the specific settings file, click Save.
3. Name the file, and navigate to a storage location.
The settings are saved as a .mct file. All settings for the tiles or ECUs are included in the saved
files.
Restoring tile and ECU settings
Restore settings backed up from another tile or ECU.
1. Select Configuration > Save & Restore > Save & Restore Settings.
2. For ECUs, select the settings to be restored.
Only the selected settings are restored. All tile settings are restored during this process.
3. To upload a saved settings file to the tiles or ECUs, click Restore.
Restoring factory defaults
Reset the ECU(s) and tile(s) back to their default settings.
This is typically done when setting up a new configuration or when swapping master ECUs from one
configuration to another. Restoring factory settings applies to all ECUs and tiles in the array. Factory
settings cannot be restored on an individual ECU or tile.
1. Select Configuration > Save & Restore > Restore Factory Settings.
2. Click Restore.
3. In the confirmation dialog, type CONFIRM in all capital letters and click OK.
Configuring the array
Christie MicroTiles Installation and Setup Guide
37
020-100329-15 Rev. 1 (05-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
