Projector sides
While standing behind the projector and facing towards the screen, the right side (A) of the projector
is on the right and the left side (B) is on the left.
•
Z-direction: projection axis originates at the center of the image plane
•
X-direction: horizontal left/right with respect to the image plane
•
Y-direction: vertical up/down with respect to the image plane
Leveling the projector
Use the projector feet to level the projector.
To adjust the vertical position of the projector, extend or retract the adjustable feet on the
bottom of the projector using the adjustable knobs on the feet.
Christie recommends adjusting the feet from the side or rear of the projector and not the front
to avoid exposure to the output light.
Installation and setup
Christie M RGB Series Installation and Setup Guide
25
020-103483-04 Rev. 1 (04-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.