Replacement
procedures
When reinstalling a module, follow the removal instructions in reverse unless otherwise indicated.
Caution! If not avoided, the following could result in minor or moderate injury.
•
SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
Notice. If not avoided, the following could result in property damage.
•
Observe all electrostatic precautions. Use a grounded wrist strap and insulated tools when
handling, servicing, or cleaning electronic assemblies.
•
Christie products must be installed and serviced by Christie qualified technicians.
•
All procedures must be performed by Christie qualified technicians.
Follow all service safety guidelines. This panel is internationally approved and is designed for safe and
reliable operation.
Required tools
•
#1 and #2 Phillips
™
screw drivers
•
ESD protective strap and pad
Removing the rear cover
The rear cover houses the replaceable components of the display panel.
1. Place the display panel face-down on a clean, protective surface.
FHD553-X Service Guide
12
020-001658-01 Rev. 1 (01-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for FHD553-X
Page 1: ...Service Guide 020 001658 01 FHD553 X ...
Page 24: ......
