Christie F100, Installation Manual

Page: 16 / 24

2-8 Pedestal and Frame Installation Manual
020-100734-02 Rev. 1 (11-2011)
Section 2: Installation and Setup
2.5.7 Connect Sources
A variety of external sources can be connected to the connection panel on the LCD panel. Properly routing the
cables from 1 LCD panel to another in the display wall will keep them from becoming tangled. For a detailed
overview, refer to the
ML10/MP10 40-65” LCD Video Wall Mount Instruction Sheet (P/N: 020-100726-xx)
and the LCD Panel FHD551-X User Manual (P/N: 020-100713-xx) .
2.5.8 Optional: Install Trim
As an optional feature, trim in the form of 8ft (2.4m) magnetic strips can be applied to the sides of the display.
Each strip covers up to 3 frames in height.
2.5.9 Optional: Install Bracket Extension Hook
To easily release individual panels installed into a display wall it is recommended the bracket extension hooks,
provided with the frame assembly, are installed. To install, thread an M4 nut and flat washer onto the hook,
insert it into the video wall mount, as shown in the illustration below. Thread another flat washer and M4 nut
onto the hook to secure it. Use a 7mm open ended wrench to completely tighten the hardware.
Front View
Back View
Hardware Configuration