Christie F100, Installation Manual

Page: 15 / 24

Section 2: Installation and Setup
Pedestal and Frame Installation Manual 2-7
020-100734-02 Rev. 1 (11-2011)
2.5.4 Install Video Wall Mount onto Frame
For a detailed overview, refer to the ML10/MP10 40-65” LCD Video Wall Mount Instruction Sheet (P/N:
020-100726-xx) and the LCD Panel FHD551-X User Manual (P/N: 020-100713-xx) .
2.5.5 Install FHD551-X LCD Panel
For a detailed overview, refer to the ML10/MP10 40-65” LCD Video Wall Mount Instruction Sheet (P/N:
020-100726-xx) and the LCD Panel FHD551-X User Manual (P/N: 020-100713-xx) .
2.5.6 Apply Permanent External Support
External support for a display wall must be designed and implemented by a
qualified installer and must comply to local area safety standards. All display walls must have
permanent external supports.
The FHD551-X LCD panel display wall requires external support regardless of its overall height. Reinforcing
the structure prevents the wall from tipping due to unforeseen circumstances.
When designing external support for a display wall consider:
• Local building codes for specific requirements.
• Size of the installation (number of LCD panels being stacked).
• Physical characteristics of the installation (including weight, center of gravity, mounting hole

location). See Section A Mechanical Drawings for technical information on display wall components.
• Type of material being considered for external support.
• Strength and stability of the vertical or horizontal surface.
• Required number of external supports.
The illustration below depicts 2 possible external support methods for a display wall. Consider your options
and choose the method that best supports your specific installation.
CAUTION! The natural frequency of support
is dependant on the size of the wall and should
be determined by a qualified installer.
Example of Ceiling Mount Support
(Shown, threaded rods installed into ceiling to support 2x2 wall)
Example of Wall Mount Support
(Shown, bars installed into back wall to support 2x2 wall)