Installation
DWU6322-GS/DWU7062-GS User Manual
23
020-001792-01 Rev. 1 (04-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
Turning the projector on
The projector cables must be securely connected before turning the power on.
1. Connect the projector power cables to AC power.
The Power button on the keypad is illuminated when the power cables are connected.
2. Ensure the lens has been installed in the projector.
3. Ensure that no one or no objects are in the beam path before turning on the projector.
4. To turn on the projector, on the IR remote keypad press
or on the built-in keypad press .
The status LED is orange with a long blink.
5. To select an input source and turn it on, on the IR remote keypad select
Input
.
Available input sources are VGA, HDMI, DVI, and HDBaseT.
The projector detects the source you selected and displays the image.
Warning!
Failure to comply with the following could result in death or serious injury.
• Do not look into the projector lens when the laser is on. The bright light may result in permanent
eye damage
The first time the projector is used, select the preferred language from the Main Menu after the
startup screen is displayed.
1
1
1
2
Power on
1
1
Power on
1
1
Input Key
1
2
