58
Configuring communications
Setting the hot key
To directly call out a function without going through the layers of the on-screen display (OSD)
menus, select a specific function for a hot key. To access this function, press
HOT KEY
on the
remote control.
1. Select
Menu
>
Configuration
>
Hot-Key Settings
.
2. Select the one function for the hot key:
• Size Presets
• Picture Settings
• Default Value
• Detail
• Contrast Enhancement
• Light Source Mode
• Image Freeze
• Information
• Disable Warp/Blend
3. To set the selected function as the hot key, press
ENTER
.
Configuring date and time settings
Configure the date and time settings of the projector. Make sure these settings are accurate if you
want to use the schedule feature.
1. Select
Menu
>
Configuration
>
Date and Time
.
2. Set up the appropriate setting:
•
Clock Mode
—Sets the clock mode to Local or Network. A NTP Server is required if the
clock mode is set to Network.
•
Date
—Sets a date for the projector. The date format is Year/Month/Date.
•
Time
—Sets the time for the projector.
•
Daylight Saving Time
—Configures the daylight saving settings if required.
•
NTP Server
—Selects a NTP Server for the network clock mode.
•
Time Zone
—Selects an appropriate time zone for the network clock mode.
•
Update Interval
—Sets the date and time update interval.
3. To apply the date and time settings, select
Apply
.
When the hot key is set to Disable Warp/Blend, pressing the hot key once disables the currently
applied warp and blend. Pressing the hot key again enables the function and returns the warp and
blend to the screen.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (
02
-202
2
)
Copyright © 202
2
Christie Digital Systems USA Inc. All rights reserved.
