Optics
GS Series 630-635 Service Manual
66
020-001224-02 Rev. 1 (08-2018)
b. Remove the lens through the front of the projector.
4. Install the new lens.
a. Fully insert the lens assembly straight into the lens mount without turning.
b. To lock the lens in place, rotate the lens clockwise .
Replacing the complete light engine
To remove the complete light engine, complete the following steps.
1. Remove the top covers from the projector.
2. Remove the main board and I/O board.
Replacing the main board and I/O board
3. Remove the rear cover.
4. Remove the connector board.
5. Remove fans 4, and 5.
6. Remove the left-side cover.
7. Remove the thermal switch.
A
B
