Service guidelines
GS Series 630-635 Service Manual
11
020-001224-02 Rev. 1 (08-2018)
• Understand and follow all local safety codes and requirements when servicing energized (live)
equipment.
• Perform equipment service in a location free of obstructions and other hazards. For example,
you must have an unobstructed view of the area being serviced.
Wear personal protective equipment (PPE) clothing appropriate to the service you are performing.
This includes, but is not limited to, protective (electrically insulated) footwear, safety glasses, and
gloves rated for the working voltage of the equipment you are servicing.
Safety and warning guidelines
Read all safety and warning guidelines before installing or operating the projector.
This projector must be operated in an environment that meets the operating range specification.
Use only the attachments and/or accessories recommended by Christie. Use of others may result in
the risk of fire, shock, or personal injury.
Warning! Failure to comply with the following could result in death or serious injury.
• Observe all electrostatic precautions. Use a grounded wrist strap and insulated tools when
handling, servicing, or cleaning electronic assemblies.
• Do not look into the projector lens when the laser is on. The extremely high brightness can cause
permanent eye damage.
• FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated light
beam of the projector.
• UV EXPOSURE! Protective UV safety glasses with side shields and Christie approved protective
safety clothing must be worn when performing optical adjustments or servicing the product.
• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage and
power range, as specified on the license label.
Caution! Failure to comply with the following could result in minor or moderate injury.
• SHOCK HAZARD! Disconnect the product from AC before moving, servicing, cleaning, removing
components, or opening any enclosure.
• SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by
Christie.
• Christie products must be installed and serviced by Christie qualified technicians.
• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or objects rolling over the cables.
Notice. Failure to comply with the following may result in property damage.
• SHOCK HAZARD! All harnessing must be properly routed and secured as originally installed,
especially in high voltage areas.
• If the product is not being used for an extended period of time, disconnect the power plug from the
AC outlet.
• FIRE HAZARD! Do not use a power cord or harness that appears damaged.
• Always use a lens plug when installing or moving the product. This prevents contaminants from
entering the product.
• Do not use abrasive cleaners, waxes, or solvents to clean the projector.
• Always provide proper ventilation for the product to prevent overheating.
• Do not expose the product to moisture.
