Optics
DHD410S Service Manual
65
020-001481-01 Rev. 1 (10-2018)
4. To release the combiner module, remove the six M3 screws with a Phillips #1 screwdriver.
5. Flip and lift the combiner module.
6. Replace the combiner
module.
7. To re-install, follow these steps in reverse order.
Replacing the DMD
To remove the DMD board, complete the following steps.
1. Remove the top cover.
2. Remove the main board.
3. Remove the combiner module.
4. Remove the light engine.
5. Remove the four M3 screws with a Phillips #1 screwdriver.
Summary of Contents for DHD410S
Page 1: ...Christie DHD410S Service Manual 020 001481 01...
Page 77: ......