Christie D4K40-RGB Installation And Setup Manual Download Page 51

Page: 51 / 54

Regulatory

This product conforms to the latest regulations and standards related to product safety,

environmental, and electromagnetic compatibility (EMC) requirements.

Safety

•

ANSI/UL 60950-1 – Information Technology Equipment – Safety – Part 1: General
Requirements

•

CAN/CSA C22.2 No. 60950-1-07 – Information Technology Equipment – Safety – Part 1:
General Requirements

•

IEC/EN 60825-1 – Safety of Laser Products – Part 1: Equipment Classification and
Requirements

•

IEC/EN 62471-5 – Photobiological safety of lamps and lamp systems – Part 5: Image
projectors

•

UL 60950-1 – Information Technology Equipment – Safety – Part 1: General Requirements

Electro-magnetic compatibility

Emissions

•

CAN ICES-003 (A)/NMB-003 (A) – Information Technology Equipment (Including Digital
Apparatus) – Limits and Methods of Measurement

•

CISPR 32:2012/EN 55032:2012, Class A – Electromagnetic Compatibility of Multimedia
Equipment – Emission Requirements

•

FCC CFR47, Part 15, Subpart B, Class A – Unintentional Radiators

•

IEC 61000-3-11/EN61000-3-11: Limitations of Voltage Changes, Voltage Fluctuations, and
Flicker for equipment with rated current ≤ 75 A

•

IEC 61000-3-12/EN61000-3-12: Limits for harmonic current emissions for equipment for
systems with input current > 16 A and ≤ 75 A per phase

Immunity

•

CISPR 24:2010/EN55024:2010 EMC Requirements – Information Technology Equipment –
Immunity Characteristics – Limits and Methods of Measurements

Environmental

•

China Ministry of Information Industry (along with 7 other Government Agencies) Order No.32
(01/2016) on the control of pollution caused by electronic information products, hazardous

4K40-RGB Installation and Setup Guide–D4K40-RGB, Roadie 4K40-RGB

020-102961-03 Rev. 1 (08-2019)

Summary of Contents for D4K40-RGB























































Search results

Summary of Contents for D4K40-RGB

Reviews:

Related manuals for D4K40-RGB

Brands by name

Popular brands

Christie D4K40-RGB, Installation And Setup Manual

Search results

Summary of Contents for D4K40-RGB

Reviews:

Related manuals for D4K40-RGB

Brands by name

Popular brands