Christie D4K40-RGB Installation And Setup Manual Download

Page: 27 / 54

1. Plug the projector in to AC power.

The projector automatically powers on to standby mode when plugged in. The display panel
functionality becomes available.

2. To turn the light source on using the projector keypad, press and hold the power

button

until you hear a beep.
To turn on the light source using the remote, press and hold the ON button until you hear a
beep.

Projector LED status indicators

Identify the LED state colors and meaning.

LED

State

Description

Blue

Solid

Standby

Light source is off. Video electronics are off.
Projector status is OK.

Flashing

Cool down

Projector is moving to one of the two standby
states:

• Light source is off and video electronics are

booting up.

• Light source is off. Video electronics and light

source is cooling down.

Green

Solid

Light source on Light source is on. Projector status is OK.

Flashing

Startup

Projector is moving to light source on state. Light
source is warming up. Video electronics are
initializing.

Yellow

Solid

Warning in
standby

Projector is in standby state. A problem exists with
the projector that does not prevent it from
operating.

Flashing yellow/green

Warning during
startup

Projector is in a startup state. A problem exists
with the projector that does not prevent it from
operating.

Flashing

Warning with
light source on

Light source is on. A problem exists with the
projector that will not cause it to shut down.

Flashing yellow/blue

Warning during
cool down

Projector is in a cool down state. Light source is off.
Video electronics and light source are cooling
down. A problem exists with the projector that
does not prevent it from operating.

Red

Solid

Error in
standby

Projector is in standby. An error exists that
prevents the projector from starting up.

Flashing

Error

An error with the projector exists during startup,
cool down, or when the light source is off. Projector
will proceed to shut down.

Off

AC off

The AC power is off.

Installation and setup

4K40-RGB Installation and Setup Guide–D4K40-RGB, Roadie 4K40-RGB

020-102961-03 Rev. 1 (08-2019)

Summary of Contents for D4K40-RGB























































Search results

Summary of Contents for D4K40-RGB

Reviews:

Related manuals for D4K40-RGB

Brands by name

Popular brands

Christie D4K40-RGB, Installation And Setup Manual

Search results

Summary of Contents for D4K40-RGB

Reviews:

Related manuals for D4K40-RGB

Brands by name

Popular brands