Christie CP2308-G, User Manual

Page: 74 / 98

Command Description
Pulse Relay Sends a pulse to a specific JNIOR relay for the specified time (in milliseconds)
Execute Macro Executes a JNIOR macro
You can create macros on the JNIOR device and call them using the
Execute Macro
command. Make
sure you use \0D for a carriage return and \0A for a line feed.
To create and run macros on the JNIOR, use the JNIOR Support Tool to enable and configure the
Cinema.JNIOR application. It is recommended that you install Cinema.JNIOR version 2.22.1115.1501
or later. For additional information, see INTEG Process Group (www.integpg.com). Port 9200 is the
default Ethernet port for sending automation commands to the JNIOR.
Dolby Cinema processor actions
These are the available built-in commands for Dolby CP650, CP750, and CP850 devices:
Command Description
Mute On/Mute Off Enables or disables muting
Set Format (CP650 only) Selects the format
Set Fader Level Sets the fader level
Send Message (CP850
only) Sends the specified message
If you need to control additional functions and a built-in command is not available, send a command
string in a macro. For example, send this command to enable surround boost on the Dolby CP750:
cp750.sys.surround_boost 1\0D
Make sure that you include a carriage return (
\0D
) at the end of each command. For more information
about controlling other features with serial commands, see the Dolby CP750 documentation.
The default Ethernet port for sending automation commands to the Dolby CP650 is port 61412. For
Dolby CP750 and CP850, the default Ethernet port is port 61408.
SKA-3D actions
These are the available built-in commands for SKA-3D devices:
Command Description
Set Audio Input Channel Sets the audio input channel
Mute On/Mute Off Enables or disables muting
Set Master Volume Sets the master volume for the system
Set Video Input Channel Sets the video input channel
Active Trigger Input Controls eight SKA-3D presets
To use this command, a trigger input must be associated with each of the SKA-3D
presets
Automation
CP2308-G User Guide 74
020-102863-01 Rev. 1 (05-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.