Adjusting the image
Adjust the projector image. Christie recommends warming the lens before completing these
procedures as focus may change as the lens warms.
Correcting keystone effect
Learn how to adjust the image to correct keystone effect.
Keystone effect occurs when you project an image onto the screen at an angle. As a result, the image
appears distorted and resembles a trapezoid.
If the image suffers from slight keystone effect, it can be corrected with electronic cropping.
If the keystone effect is severe, you can unevenly adjust the feet to compensate for projector tilt. It is
recommended that you use lens offset to align the center of the image to the center of the screen
before you correct the keystone effect.
If one side of the image is longer than another, adjust the tilt and level of the projector.
When making the adjustments, set the light source to minimum power.
Horizontal keystone
Vertical keystone
Projector skewed horizontally to the screen
Projector tilted vertically to the screen
Correcting dual projector horizontal keystone
Learn how to correct horizontal keystone.
1. On both projectors, turn the light source on and open the douser.
2. Align the dual projector images.
CP2308-G User Guide
50
020-102863-01 Rev. 1 (05-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for CP2308-G
Page 1: ...User Guide 020 102863 01 CP2308 G...
Page 98: ......
