Setting up multiple projectors
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe User Manual
72
020-001835-02 Rev. 1 (05-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
The color of the slider turns to green to indicate content synchronization is active. When enabled,
ingested content on the master projector is synchronized to all slave projectors automatically.
Disable multi-projector settings when the second projector is not required to display content.
1.
In the left navigation menu, tap Service Setup > Multi-Projector Setup.
2.
Tap the Multi-Projector Control slider.
The color of the slider changes to gray to indicate it is inactive.
Disable a slave projector when it is no longer required or when it is replaced by another projector.
1.
In the left navigation menu, tap Service Setup > Multi-Projector Setup.
2.
Tap the slider in the Enabled column of the slave projector you want to disable.
The color of the slider changes to gray to indicate it is inactive.
Delete a projector from a multi-projector configuration when it is no longer required or when it is replaced by
another projector.
1.
In the left navigation menu, tap Service Setup > Multi-Projector Setup.
2.
In the Delete column of the slave projector you want to delete, tap Delete.
3.
To confirm the deletion, tap Delete.
Summary of Contents for CP2306-RGBe
Page 1: ...CP2306 RGBe CP2308 RGBe CP2310 RGBe User Manual 020 001835 02...
Page 98: ......
Page 99: ......
