5-22
CP2230 Service Manual
020-100562-06 Rev. 1 (05-2016)
Section 5: Parts and Module Replacement
5.10 Projector PCB’s
5.10.1 Cardcage Assembly
The cardcage assembly is located in the light engine compartment. It consists of the PIB, ICP, Link Decrypter
and Backplane. The LEQD is connected on the outside of the cardcage.
(Estimated Replacement Time: 35 minutes)
1. Remove the front top lid. Refer to
5.5.1 Front Top Lid, on page 5-6.
2. Remove the high security lid. Refer to
5.5.2 High Security Lid, on page 5-6
3. Remove the PIB/ICP cover. Refer to
5.5.9 PIB/ICP Cover, on page 5-9
.
4. Release the security ring by pressing down on the latch located on the inside of the cardcage.
(
Figure 5-31
)
NOTES:
1)
Marriage is broken when this latch is toggled.
2)
Only Christie authorized
service technicians should remove the security ring.
5. Remove the security ring by pressing down on the latch on the right-side of the cardcage. (
Figure 5-32
)
Figure 5-31 Spring Latch for Security Ring
Figure 5-32 Remove Security Ring
