Editing the 3D flat 1998 x 1080 channel
Edit the projector settings in the 3D channels to ensure the 3D content is displayed correctly.
1. Select Menu > Channel Setup.
2. From the Channel Name list, select 3D Flat 1998x1080.
3. In the left pane, select Config 1 and edit these settings:
a) From the Input list, select 292-Dual.
b) From the Data Format list, select YCrCb 4:2:2 10 bits x2.
c) From the Source File list, select 1998x1080 1.85 Flat.
d) From the Screen File list, select Flat.
4. In the left pane, tap Config 2 and edit these settings:
a) From the Measured Color list, select 3D Onsite.
If this option is not available, define a measured color gamut data file (on page 70).
b) From the Target Color list, select DC28_DCIXYZE_314_351.
c) From the Color Space list, select YCxCz Inverse ICT.
d) From the Gamma list, select Gamma 2.6.
e) From the LUT-CLUT list, select Linear_9x9x9.
5. In the left pane, tap 3D Control and edit these settings:
a) From the 3D Sync Input Mode list, select Line Interleave.
b) From the Frame Rate N:M list, select a frame rate suitable to your 3D system.
For example, for 24Hz 3D, select 2:2, 4:2, or 6:2 for single, double, and triple flash.
c) From the L/R Display Sequence list, select Left (L1R1 L2R2).
d) From the 3D Sync Polarity list, select True.
e) In the Dark Time field, enter 430 or a value appropriate for your 3D hardware.
f) In the Output Delay field, enter -120 or a value appropriate for your 3D hardware.
g) In the Phase Delay field, enter 0 or a value appropriate for your 3D hardware.
Editing the 3D scope 2048 x 858 channel
Edit the projector settings in the 3D channels to ensure the 3D content is displayed correctly.
1. Select Menu > Channel Setup.
2. From the Channel Name list, select 3D Scope 2048x858.
3. In the left pane, select Config 1 and edit these settings:
a) From the Input list, select 292-Dual.
b) From the Data Format list, select YCrCb 4:2:2 10 bits x2.
c) From the Source File list, select 2048x858 2.39 Scope.
d) From the Screen File list, select Scope.
4. In the left pane, select Config 2 and edit these settings:
a) From the Measured Color list, select 3D Onsite.
Viewing 3D content
CP2208 User Guide
71
020-101916-03 Rev. 1 (12-20120)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for CP2208
Page 1: ...User Guide 020 101916 03 CP2208 ...
Page 94: ......