Type
Format
Frame rate
(Hz)
Sampling
Bit-depth
Notes
(ST 2081-12)
mode 2 structure
III
Y'C'
B
C'
R
/RGB/
4:4:4
12bpc
Y'C'
B
C'
R
/RGB
component at
quad-link 6Gb/s
(ST 2081-12)
mode 2 structure
III
Y'C'
B
C'
R
/4:2:2:4
12bpc
Y'C'
B
C'
R
component at
quad-link 6Gb/s
(ST 2081-12)
mode 2 structure
IV
Integrated Media Block (IMB) video source
Connect a compatible device to either the S2 or S4 interface of the projector to send digital video data
from an IMB to the projector.
Table 11: Supported IMB input configurations
Input configuration
Description
IMB – S2 or S4
Enables connection of MPEG-2 video formats.
Enables connection of MPEG-2 MXF interop video formats.
Enables connection of SMPTE-compatible 2D and 3D video formats
Contact Christie Technical Support to learn which S2 and S4 IMB devices are compatible with Christie
projectors.
Series 2 IMB video formats
S2 IMB video format support is determined by the IMB make and model. Refer to the associated IMB
documentation to understand which of the following video signals are supported.
All MPEG-2 content is converted in the media block to RGB 4:4:4 8-bit before play out.
Video Input panel
C 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB
37
020-103244-04 Rev. 1 (03-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
