Return the TCGD file used by the specified channel:
(TCG+CHAN? "Media Block Flat")
Result:
(TCG+CHAN! "DC28 DCI XYZE 314 351")
Set the TCGD file for the specified channel to the specified file:
(TCG+CHAN "Media Block Flat" "Rec. 709")
Set the TCGD file for the specified channel to the specified file at index 1 from a previous listing:
(TCG+CHAN "Media Block Flat" 1)
TMD–Time and Date
Sets the time zone and Daylight Saving Time, and reads the time and date.
Parameters
•
Access level: Service
•
Power level (minimum): Power Down
Commands
Command
Description
Values
TMD+DATE?
Returns the date in the format yyyy-mm-dd. (Read-
only)
—
TMD+DSTA?
Returns the status of Daylight Saving Time. (Read-only) —
TMD+DSTA <0 | 1>
Enables or disables the Daylight Saving Time.
0 = Disables Daylight Saving
Time
1 = Enables Daylight Saving
Time
TMD+TIME?
Returns the time in the format hh:mm:ss. (Read-only)
—
TMD+TOFF
Sets the SM time offset in seconds.
+/- 300 seconds
Examples
Return the date:
(TMD+DATE?)
Result:
(TMD+DATE! "2019-08-21")
Return the status of Daylight Saving Time:
(TMD+DSTA?)
Disable Daylight Saving Time:
(TMD+DSTA 0)
C
™
serial commands
C Technical Reference–Serial Commands
28
020-103075-05 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Summary of Contents for CineLife+ 4 Series
Page 1: ...Technical Reference 020 103075 05 CineLife Serial Commands...
Page 32: ......