Christie CineLife+ 4 Series, Technical Reference

Page: 13 / 32

HLP–Serial Help
Queries a list of all available serial commands, with brief descriptions and current enabled states.
Parameters
• Access level: None
• Power level (minimum): Power Down
Commands
Command Description Values
HLP? Requests entire command help listing. (Read-only) —
HLP? "<command>" Requests help list for a single command. (Read-only) —
Examples
Retrieve entire command help listing:
(HLP?)
Retrieve all parameters and descriptions for PWR command:
(HLP? "PWR")
ILF–ILS File
Gets or sets the active or specified channel intelligent lens system (ILS) file.
Parameters
• Access level: Installer
• Power level (minimum): Power Up
Commands
Command Description Values
ILF? Returns the ILS file in use by the system.
(Read-only) —
ILF?L Returns a list of all available ILS files.
(Read-only) —
ILF "<file>" Sets the active ILS file. file = Subject to the range returned in ILF?L
ILF+CHAN?
"<channel>" Returns the ILS file used by the specified
channel. (Read-only) channel = Name of a valid channel
C
™
serial commands
C Technical Reference–Serial Commands 13
020-103075-05 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.