Installation and setup
Christie CIC 1DLP Camera Installation and Setup Guide
8
020-002066-01 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing Christie CIC 1DLP Camera
To install and connect the Christie CIC 1DLP Camera to the projector, follow these steps:
1. Align and secure the bracket to the rear side of the camera with the supplied screws.
2. Align the holes marked A on the camera bracket with the holes on the bottom of the projector
and secure the camera to the projector with the four M3L8 screws.
x2
GS Series projector
HS Series projector
x2
x2
