Christie CA20-AC Installation And Setup Manual Download Page 23 | Manualshive

Page: 23 / 52

background image

1. To operate CounterAct in single-lamp mode, move both lamp mode switches to the 1L position.
2. To operate CounterAct in dual-lamp mode, move both lamp mode switches to the 2L position.

CounterAct Configure automatically adapts with the setting of the Disinfection mode.

You cannot position one lamp mode switch in the 1L position and the other in the 2L position. The
software displays a

Lamp Setting

error.

Installing CounterAct Configure

™

Use the CounterAct Configure application to pair and configure fixtures, track operating hours and

status, set a disinfection schedule, and manually turn fixtures on and off.

1. On the tablet, navigate to http://christiedigital.com/uv-app or

2. Download the CounterAct Configure application to the tablet.

The download file is a zip file containing the apk file (Android install file), .bin file (MCU
firmware), and .gbl file (Bluetooth module).

3. Unzip the download file onto the tablet.
4. Navigate to the location on the tablet where extracted files are stored.
5. Run the .apk file to install the application.

If you have not already authorized Android to install apps from this file location, you must do
so before the installation can proceed.

Logging into CounterAct Configure

Log into the CounterAct Configure application to manage the room and fixtures.

1. Open the CounterAct Configure application.

Installation and setup

CounterAct Installation and Setup Guide

23

020-103456-02 Rev. 1 (12-2021)

Copyright

©

2021 Christie Digital Systems USA, Inc. All rights reserved.

«
...
21
22
23
24
25
...
»

Summary of Contents for CA20-AC





















































Reviews:

No comments

Related manuals for CA20-AC

Brand: Baileigh Industrial Pages: 40

Brand: B&G Pages: 3

Brand: Major Pages: 52

GPSMAP 188 Sounder

Brand: Garmin Pages: 134

The Wave Transformer

Brand: EarthQuaker Devices Pages: 21

Brand: Kamikaze Pages: 112

Brand: KAM Pages: 2

Brand: Waterpik Pages: 2

Brand: WaterUps Pages: 2

Brand: Posture Pump Pages: 2

Brand: SAC Pages: 2

Team Agile Color Tune TM16-0

Brand: GRAU Pages: 24

Brand: Cuisinart Pages: 159

DJ Laptop stand +tray

Brand: Power Dynamics Pages: 3

Brand: K-SPORT Pages: 5

Brand: Brillion Pages: 56

Brand: Marcy Pages: 27

Brand: Rocker Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands